Stop Condensation and Treat Black Mould

Mould and Mildew Loves Condensation
Black mould growth is motivated by the moist conditions that are offered by condensation in the corner of windows and walls, where still damp air supplies the perfect conditions for mould spores to settle and grow.

Condensation is a common cause of wet walls in homes. It can be so bad that you think you have a leak rather than condensation, but that is because our modern-day draught-proof houses can cause stagnant wet air getting trapped inside your house and causing condensation on windows walls and ceilings.

If you have seen water gathering on your windowsills or sooty black mould growing on the ceiling then you may have condensation.

10 Step Guide to Stop Condensation.

  • Aerate your home- change the air once a day. Open a window, or fit drip vents. Where you have actually trickle vents fitted make sure you leave them open.
  • Fit a fan, and use it— ensure your restroom fan is working while you are bathing and bathing, use your cooking area extractor fan when you are cooking.
  • Do not dry washing inside— if you have a tumble dryer make certain it is appropriately vented or purchase a self condensing design.
  • Use a Dehumidifier to rapidly dry out a location that is very wet.
  • Use a low cost digital Hygrometer to assist you keep your humidity between 55-65% this is the best environment for comfortable living. Do not forget you can use memory setting to keep an eye on levels of relative humidity in your building throughout the day.
  • Cold spots are constructing problems and may suggest failing wall ties, so use an infra red Thermometer to discover any cold spots, along with badly insulated and moist locations.
  • Test walls and floors with a Damp Meter to make sure that you don’t have water ingress or leaks.
  • If you have damp walls and wish to make certain you have condensation use Condensation Test Strips in affected areas. They will change colour if condensation occurs, dismissing some other kinds of defect.
  • Wash down all surfaces, which have actually undergone mould development, with Anti-Mould Cleaner prior to redecoration.
  • Include Anti Mould Concentrated Additive to all paints that you use (unless you are using Anti-Mould Paints).

Post Sponsored by Loughton Roofs – Local Roofing Company in Loughton.

Leave a Reply

Your email address will not be published. Required fields are marked *