Selling Your House Tips and Advice

If you want a fast house sale you have to have an edge in the Housing Market.

‘ How do I make my home attractive to purchasers?’– you ask, well you provide a touch of luxury.

Our televisions have actually been flooded with aspirational makeover, self construct, and property renovation programs which intend to make the most of our living spaces. We are also continuously bombarded with pictures of celeb homes in high-end publications, all of which make us aspire to a designer way of life.

Leading Tips to Boost Sales Price
Being energy efficient was the main factor home hunters provided for paying a premium rate. The survey revealed that some home purchasers are prepared to pay around ₤ 12,500 more for a house which had the features they desired, that included a conservatory, underfloor heating and double garage.

Other preferable home functions noted by those surveyed included, walk-in closets, jacuzzi, air conditioning and even a set of stables. Now while the majority of us could not build a steady block for the next owners of our home, it is a relatively easy thing to build a partition wall for a walk in closet, and you can then get assist with fitting moving doors to finish off your project.

Top ten aspirational features house hunters are looking for:

  1. A home that’s energy efficient
  2. Conservatory
  3. Underfloor heating
  4. A double garage
  5. Air conditioning
  6. Jacuzzi bath
  7. State of mind lighting
  8. Kitchen/diner
  9. Terrace overlooking a big garden
  10. A contemporary interior

Post Sponsored by Seaham Pressure Washing – Local Pressure Washing Specialists in Seaham.

10 Energy Saving Tips

There are great deals of energy saving products on the market consisting of energy saving light bulbs, which we are all knowledgeable about by now, however other energy conserving gadgets includes refrigerators, cleaning devices and boilers.

It makes sense for house owners and renters to employ energy conserving concepts, and they don’t even have to cost you any money to execute, as you will see from our energy saving methods listed below:

  1. Insulate your loft
    This is the most expense effective energy conserving house Improvement project you can perform in your house, and you can discover our how in our DIY Projects.
  2. Have cavity walls insulated
    If your walls are not currently insulated then this is an exceptional energy conserving Home Improvement job which will save you approximately 30% of your homes heat loss, discover more in our DIY Projects on Cavity Wall Insulation.
  3. Draughtproof your house
    If you can feel cold air coming through doors and windows then heat is getting away. You can loose approximately 20% of your home’s heat lost though drafts. Find out how to fit draft excluders to windows and doors and stop drafts in our DIY Projects section.
  4. Fill in any fractures around window frames and along skirting boards
    If you have exposed floorboards you may need to fill in fractures in between floorboards to stop draughts, and we discuss how to do that in our Do It Yourself Projects section.
  5. Turn down your warm water to 60 degrees C
    If you water thermostat it is set higher than sixty degrees, then your system will merely include cold water to it to bring it down to this much safer temperature, so you are losing energy making it hotter than it requires to be. This is free to carry out too.
  6. Decline your room thermostat by 1 degree
    Another totally free energy saving step, this costs you nothing but may conserve you approximately 5% of your energy intake, and it is unlikely you will discover the distinction in terms of sensation warm and comfy.
  7. Do not heat unused rooms
    This likewise costs nothing, simply switch off the radiator or heating unit in an unused room, and close the door to keep the other spaces warm. Please keep in mind that you must ‘air’ the room and check for condensation each day, since this room will be cool, and you do not desire the air to wither causing mould and mildew, see our condensation project to find out more.
  8. Energy conserving Grants
    There are lots of Government initiatives to encourage homeowners to execute energy saving products. You can discover more on our sister site BeEnergySmart on their Grants and Offers pages, and there is more info about the grants readily available on the Energy Saving Trust website.
  9. Fit a new A-rated gas boiler
    Old boilers mishandle and pricey to run you can learn more about brand-new Combination Boilers in our Projects Section.
  10. You could save money by switching to a brand-new energy provider
    You can check out the tariffs available on any number of energy contrast sites we like the one by Which called Which Switch– we are a sucker for a rhyme! Saving energy also assists to reduce the impact on the environment and you can enhance this additional by utilising green energy where possible.

Post Sponsored by Newcastle Teeth Whitening – Local Teeth Whitening in Newcastle.

Fitting Shutters to Windows

Shutters have actually ended up being incredibly popular in the UK for a variety of reasons, they are decorative, they shade houses from hot sun and supply personal privacy without the requirement for naff webs. Shutters can likewise be used to provide extra insulation and security in your home.

Interior and Exterior Shutters
Shutters are typically made from wood, metal or composite products, and they come in various colours either painted surfaces or wood stain to match the client’s decoration and taste. Shutters can be fitted to the beyond a home, and outside shutters are generally strong, although fitting louvered external shutters can look lovely on the right house. Internal shutters were generally strong pine in Victorian homes, however these days most internal shutters are louvre shutters, likewise known as Plantation Shutters. The louvers are available in various basic sizes– 47mm, 63mm, 89mm and 114mm, and the choice of size will depend upon the size of the window and on individual preference.

It is also a matter of personal preference where the shutters are fitted. The choices are to fit them to the within the window reveal, on the edge of the expose, or even on the outside of the reveal.

You can pick whether to have the shutters made and fitted for you or you can fit them yourself offering you are a moderately able DIYer. We have projects that will help you fix your shutters and battens to masonry on the primary site in our How To area.

The company who supplies your shutters will probably choose to come and measure the windows themselves to ensure the measurements are accurate.

The main problem you may experience is that while shutters are made square your windows might not be perfectly square, particularly if you live in an older house. One method to conquer this is to fit the shutters onto a frame. You can then make sure the surround is square before you try to fit your shutters. This can be quickly achieved by scribing and fitting battens to the within your window recess.

Shutter Styles and shapes.
Complete height shutters are precisely what they sound like– they comprise of a set of shutters which fit either side of the window and are a high as the window.

Tier on tier are two (or more) sets of shutter on top of each other allowing you to open or close part of the areas to fit the weather condition or to fit your personal privacy requirements.

Tracked shutters— these are planned to allow you to have shutters on a length longer than 2 m period, however they can likewise be used for wardrobe doors or as a room divider. They concertina along the track so they use up very little space when they are folded back.

Café shutters come about half way up a window and help to provide privacy, leaving the top half of the window open up to the light.

Shutters can likewise be made in other shapes such as round, half-round and triangular, and can be fitted to windows and doors and even to conservatory roofings.

Shutters make a trendy and more long lasting option to window blinds and they are easily maintained by regular dusting and cleaning with a moist cloth sometimes.

Post Sponsored by

Stop Condensation and Treat Black Mould

Mould and Mildew Loves Condensation
Black mould growth is motivated by the moist conditions that are offered by condensation in the corner of windows and walls, where still damp air supplies the perfect conditions for mould spores to settle and grow.

Condensation is a common cause of wet walls in homes. It can be so bad that you think you have a leak rather than condensation, but that is because our modern-day draught-proof houses can cause stagnant wet air getting trapped inside your house and causing condensation on windows walls and ceilings.

If you have seen water gathering on your windowsills or sooty black mould growing on the ceiling then you may have condensation.

10 Step Guide to Stop Condensation.

  • Aerate your home- change the air once a day. Open a window, or fit drip vents. Where you have actually trickle vents fitted make sure you leave them open.
  • Fit a fan, and use it— ensure your restroom fan is working while you are bathing and bathing, use your cooking area extractor fan when you are cooking.
  • Do not dry washing inside— if you have a tumble dryer make certain it is appropriately vented or purchase a self condensing design.
  • Use a Dehumidifier to rapidly dry out a location that is very wet.
  • Use a low cost digital Hygrometer to assist you keep your humidity between 55-65% this is the best environment for comfortable living. Do not forget you can use memory setting to keep an eye on levels of relative humidity in your building throughout the day.
  • Cold spots are constructing problems and may suggest failing wall ties, so use an infra red Thermometer to discover any cold spots, along with badly insulated and moist locations.
  • Test walls and floors with a Damp Meter to make sure that you don’t have water ingress or leaks.
  • If you have damp walls and wish to make certain you have condensation use Condensation Test Strips in affected areas. They will change colour if condensation occurs, dismissing some other kinds of defect.
  • Wash down all surfaces, which have actually undergone mould development, with Anti-Mould Cleaner prior to redecoration.
  • Include Anti Mould Concentrated Additive to all paints that you use (unless you are using Anti-Mould Paints).

Post Sponsored by Loughton Roofs – Local Roofing Company in Loughton.

Keeping Cool and Keeping Safe – 10 Tips to Survive the Heatwave

We all tend to relax in the long hot summer season days, and that is fantastic, but do not let unwind ended up being lax, when it comes to house security.

Of course you wish to have air entering the house when it is so hot, but you need to make sure that you preserve house security too.

A robber searches for weaknesses in security since it makes their task much easier. This means that hot weather can likewise be big business for robbers and thieves due to the fact that they understand that lots of people will be off their guard when it concerns leaving windows slightly open or back doors opened. We have all done it but it’s an open welcome for individuals to take your things’, described an agent from CCTV42. ‘Of course, if you have security CCTV in place then not just is it a noticeable deterrent, it can suggest that even if you do suffer a security breach, you ought to have exceptional quality video proof of who the burglar or thief was.”

Here are our top 10 heat-busting ideas, with security in mind!
Windows– Use your windows correctly. You can open most modern windows just a crack and lock them in that position. If you have sash windows open the leading and the bottom area to create a convection present and take in cooler air at the bottom and take out warmer air at the top (set up locks to ensure they are open without enabling access to thieves). Shut and lock your windows when you are out– double glazed windows will assist keep out the heat, especially if you shade the windows (see the next bit). If you do not have window locks discover how to fit them.
Curtains- Shut your curtains in spaces where the sun is shining in, even if you are home, because the light can be found in means there is more heat can be found in too. Use black out material or blackout blinds to provide you the most protection against the heat. You can keep your curtains closed while the windows are open to permit a cool draft while safeguarding the space from the sun.
Shutters- Install security shutters or metal grilles. That way you can leave the doors and windows open up to the air without being open to burglars. This deserves doing if you reside in a location where you get too hot regularly.
Blood circulation– Try to get a draft through your home, open windows on opposite sides of your house or flat, and you may require to prop them open. Open windows on the ground and top floors to create a convection present– warm air increases so direct it out through top floor windows.
Security Devices- Install a CCTV camera and intruder alarm to assist deter the opportunity burglar. (See the quote from Buckinghamshire based CCTV42 above, and have a look at their CCTV buyers guide online.).
Cooking- Cook outdoors if you can. If you use your BBQ, or eat salads, then you are not adding heat to your home. Please do not use a BBQ on a veranda– the Fire Brigade have provided cautions about the increase of flat fires brought on by doing this. You might get an electrical frying pan but make sure you have an RCB and do not leave it outside after usage, where it could get wet.
Extractor- Have a fantastic extractor fan in the bathroom and kitchen– to take out any heat and steam you produce when cooking or bathing. Proper ventilation helps keep the house cooler, see more about Ventilation and Ducting.
Water- Drink loads of water, your body needs water to help regulate your body’s temperature. Keeping a container of water in the fridge will offer you a cooling result. Sit with your feet in a bowl of cool water, this will assist keep your whole body temperature cooler, and you can add a couple of ice every so often. Spay a mist of cool water onto you skin using a tidy garden water spray– make sure it has no chemicals in it!
Stay in the shade- During the hottest part of the day, 11am– 4 pm, attempt to avoid of the sun if you are impacted by the heat. Set up a garden awning or parasol to provide yourself shade in the garden, take an umbrella out with you if you are walking. If you are repairing and awning outside you might need to understand more about fixing to concrete and steel lintels.
Purchase a fan- use a fan to give yourself a breath of air, this is especially helpful in the bed room during the night to help you sleep.

Post Sponsored by

Cleaning power shower heads

If you reside in a difficult water location, limescale will be no stranger to you. Limescale blocks your cold water pipes, kettle aspects, and worst of all bits of limescale enter into your tea cups!

Limescale is formed as water drips through rocks on its journey down hills and through valleys to the reservoirs, dissolving little particles of ‘lime’ (Calcium Carbonate), which are then brought into our water products. From there it is treated and pumped to our homes, but the treatment just eliminates damaging germs and other pathogens, it does not eliminate the Calcium Carbonate. Water that has a high content of Calcium Carbonate is described as ‘difficult water’

Limescale bonds to a metal surface more easily in cooler conditions. It is more easily dissolved in warmer water, which is why main heating pipes suffer less in hard water areas than drinking water does.

Limescale bonds to other limescale deposits easily, so as soon as the bonding procedure begins to occur on your copper pipework the scale deposits grow rapidly to partly obstruct your pipelines. With a strong water pressure, the loosest of the limescale is forced off, a little like a pressure washer, and these are the bits that enter into shower heads and start to obstruct the circulation of water through the shower. As soon as the shower is turned off, the water in it cools off, and the limescale deposits start to gather on the deposits already in the shower head.

The build up decreases the size of the holes in the shower head increased. The outcome is a decreased flow from the shower which gives you a poorer shower experience. However if you have a power shower, the blocked shower head puts greater pressure and stress on the pump as it attempts to force water through the blocked holes, that are getting smaller sized and smaller.

The answer? Clean your shower head regularly to prevent the build up of limescale.

Usage Vinegar to Clean Your Shower Head
There are a variety of chemicals on the market for cleaning shower heads and descaling kettles, however the best (and probably cheapest) DIY way, is to use distilled white vinegar.

You can either: take the shower head apart and place the bits in a container to soak them for an hour in the vinegar, or you can try an incredible little idea that we got from one of our users.

Pour the vinegar into a sandwich bag and tie it to the shower head in some way (an elastic band is ideal). Leave it there for about an hour and examine. An hour is typically enough time, however more might be needed if you reside in a really hard water area, and then simply run the shower for a minute wiping the shower head with a soft cloth or sponge, to get rid of the vinegar. Leaving the shower head in the vinegar for longer will not damage it, so you might use this process after your early morning shower, go off to work while you shower head soaks in the vinegar, and wash it when you return.

As soon as you have actually descaled your shower head with the vinegar you can also use it to clean the taps, tiles and shower screen for a sparkling finish.

Post Sponsored by

Do Not Leave Your Heating On All Day

Now the weather condition is cooling down, and we are likely to have the main heating on, our ideas naturally rely on ways to conserve cash on heating expenses.

One of the hotly discussed subjects is whether it is more economical to have the heating on all the time (and simply leave the thermostat set to manage the temperature level), or to just heat up your home when we remain in it.

We finally had to settle the argument by turning to the Energy Saving Trust to find a definitive response (and to be able to proceed with our ‘genuine’ work).

If you are at house all the time then it does make sense to have the heating on all the time, and to set the thermostat as low as you can to still feel comfortable. Research from the Energy Saving Trust reveals that lowering the thermostat setting by one degree can make a saving of about ₤ 65 annually.

If you run out your home for part, or most of the day, then it makes financial sense to just warm the house for the times that you are at home. This was the contentious part, due to the fact that a few of our old retainers felt it was much better to constantly heat up your home rather than let it cool off during the day, and then have to use up extra energy to heat it up once again.

So having established that it is much better to only warm your home when you need to, you might well ask How do I warm my house effectively? and What is the very best method to use central heating for performance and convenience?

Getting Up In The Morning
The simplest way to ensure your home is warm when you require it, is to have a timer so you can have the heating begun before you wake up. Typically half an hour will do it unless you have an older house, really bad insulation, or large spaces to heat. Then you can set it to turn off about half an hour before you leave for work.

Coming Home In The Evening
Once again set the heating to come on about half an hour to an hour prior to you can be found in. You can set the heating system to turn off an hour or 2 before you go to bed.

Aspects that impact the length of time your home takes to warm up or cool off consist of:

  • The building and construction of your house
  • The size of the rooms
  • The amount of insulation in your residential or commercial property
  • How effective the boiler is

In addition to the physical attributes of your house and heater there is also individual preference to take into consideration. Some people like a hot home and others choose a cooler environment. Current research into sleep health reveals that individuals sleep better in a cooler space, the Sleep Council recommends a bedroom temperature level of 18– 21 degrees Centigrade during the night, so it is a win scenario as far as conserving money and getting a good night’s sleep goes, and obviously if you are saving cash you are probably sleeping much easier anyhow!

Post Sponsored by East London Roofs – Find Us by typing in ‘Roof Repairs Near Me‘.

Safe as Houses

Statistics reveal that break-ins can be as much as 20% higher during the fall and winter months, as thieves take advantage of the darker nights, so now is the time to be considering house security.

Technology is constantly altering and progressing in all elements of life, consisting of security. For maximum defence and comfort there are new products on the marketplace that guarantee your house is safe and safe and secure at all times.

Digital Door Locks

Digital door locks are the really newest in lock innovation. They are modern, trendy and can be rapidly and easily fitted to the majority of front doors, whether they be lumber, PVCu or composite.

Digital locks are especially useful for families packed down with heavy shopping bags having a hard time to fish keys out of purses or pockets, or those who are continuously losing their keys. They also make these troubles a distant memory as they permit you to gain access to and secure your house using a PIN code of your option, without the need for secrets.

House security specialist Yale offers digital door locks that boast creative security features, including include the phony PIN code function, which avoids others from determining your passcode throughout gain access to. This works to puzzle onlookers, while at the same time enabling you to enter your PIN away from prying eyes, keeping your home safe and secure.

Momentary PINs can also be released for visitors, such as neighbours and tradesmen, and erased at the touch of a button, so there is no requirement to reveal your family passcode.

Another benefit to digital doors locks is that they are ‘pick evidence’. The methods criminals use to break and enter are constantly enhancing, but, with digital door locks there is no requirement for a key so thieves are unable to ‘pick’ the locks, hence increasing security.

Digital Doorviewers

Digital door audiences resolve the problem of needing to browse a standard spy hole to see who is at your door by providing a clear digital image that can be seen from several metres away.

Yale’s digital door viewers have large, clear screens and can be seen from all angles, enabling vulnerable or senior users, to easily see who is at the door. The Yale Recording Digital Door Viewer also has an integrated in electronic camera, enabling you to take pictures of anybody who is approaching your door.

Another location of security that has been modernised by the digital period is the house safe. Digital safes offer an outstanding method to protect cash, jewellery and other belongings from potential burglars.

Yale Certified Safes are created to be the greatest, most reliable and the hardest to break. They have thick walls and doors, with extra armour plating to protect them from prospective drill attacks. The doors are likewise laser cut, making it challenging for thieves to force the safe open. On top of this, the safes can be cash rated depending on the worth of your products.

With all these newest gizmos offered, it is now even simpler to keep you and your family secure this winter season.

Post Sponsored by

Top DIY Tips To Consider When Selling A House

Preparing to Put Your House on the Property Market

Preparing a house for the property market can be an extremely demanding experience, especially if you’re working on a tight spending plan, and the pressure that features last minute prep work can frequently force you to forget a few of the most fundamental things that need to be thought about before you start pursuing an estate agent …

The first thing, obviously, is to really concentrate on getting all the little things right. People are frequently sidetracked by their desire to wreck all of the carpets, or significantly upgrade a space and while it’s real that these things can typically assist to sell a home, the little details often have far, far more impact.

Complete the Gaps

If you’re focused on actually offering your home, put down the paintbrushes and crack open the versatile filler, then, carefully comb over your house looking for any small cracks or imperfections; any locations where the plaster has broken and any areas where fixtures are starting to pull away from the wall. These little defects are extremely, extremely obvious to people that are specifically on the lookout for any unattractive defects, and you can fill them in a couple of minutes; simply by using a base filler.

Remember to sand the location smooth once the filler’s dried though, and be sure to cover with a small splash of paint that matches your walls, otherwise you risk of simply drawing attention to the flaw.

Make sure to fill any un-used image holes as well– it might seem like a weird thing to flag up, however people actually do focus on these little information when browsing a residential or commercial property, and I’ve seen possible sales fall flat on their face since a possible purchasers noticed something that leaves them with a negative impression of the residential or commercial property overall. At the end of the day, you’ll never ever have the ability to predict the method which an audience will respond to any viewed faults, so it’s finest to cover all of your bases

On the subject of minor details, it’s also very crucial to bear in mind the front of your home– I’ve currently said that attempting to focus on large jobs like painting can be a waste of time, but sometimes a fast coat on the front door/window frames can truly help to neaten things up, as can a quick weed in and around any drives or paths.

Declutter and Clean up
When the exterior’s looking stunning, and you’ve made sure that there are no unpleasant imperfections inside your house, the next thing to do is focus on any fittings– correct pictures, make sure your mirrors are hung effectively and do everything you can to uncluttered your house so that you’re increasing the quantity of area on display. All of these things may appear like fairly minor factors to consider, however when you’re trying to develop the best possible impression, without spending an absolute fortune, they actually do make all of the difference …

Finished? Congratulations! You’ve made a huge distinction for very little expense, simply by ensuring that you resolve the common issues that the majority of people forget about entirely. Once you’ve completed tidying up, and dealing with any junk/clutter that you don’t plan to take with you after the sale, you’re excellent to go.

Don’t hurry off just yet however– after you’ve put that much time into neatening your home up, and attending to the most minute of information, the last thing you desire to do is rush into a sale without doing your own prep work on the financial side.

Pick Your Agent Wisely
The main pointer that I have for you when it comes to in fact putting your home on the market is this– do your research. There’s no point learning how to get your residential or commercial property prepared just to fall down at the stage where you want to sell your property.

The primary suggestion that I have for you when it pertains to in fact putting your house on the marketplace is this– do your research, particularly when it concerns picking an estate agent. There’s no point learning how to maximise your opportunities of selling if you’re not also going to ensure that you select an estate representative that’s going to put equivalent levels of effort and dedication into getting the right people through the front door.

Post Sponsored by Doncaster Kitchen Fitters – Local Kitchen Fitters in Doncaster.

How To Clean Your Gutters Safely

With the arrival of fall come dead leaves, a lot of which will wind up in your gutters. Left ignored, leaves and other particles, such as twigs and moss, can trigger clogs and result in water dripping into your roof triggering severe damage. Cleaning your guttering at least twice a year could conserve you an expensive repair work later.

Gutters with Leaves

Working at height securely implies using the best equipment …
Doing that, of course, suggests getting access to the guttering. If it’s a company facilities, then you really ought to have specialised height devices for basic service and maintenance, but even if it’s your house, having the right platform will not just make those tasks around your house go more quickly, it will likewise make them a lot more secure.

When performing tasks at height, such as cleaning a gutter, a ladder often will not do. What you require is a correct security platform for work area and your devices.

Selecting when you carry out the work can make a huge difference too. Wait till a few dry days have passed, as the debris will not be so mucky. Make sure it’s not too windy either. Numerous security platforms are developed to operate in high winds, it’s definitely not a good idea.

While having the ideal devices for gain access to need to be your concern, there are other safety issues to take in factor to consider too. Make sure you use a set of sturdy work gloves. An additional set of latex gloves under these will protect you from dampness and odour. Wear shatterproof glass to safeguard your eyes from flying debris.

For the job, you’ll need 2 containers; one for the debris, and another for your tools. You’ll likewise require a trowel, a garden hose pipe, a drill, screwdriver, any replacement guttering or parts needed, and sealant. With all this equipment, you can see how the important it is to have the right safety platform, both for your tools, as well as area to work

Getting to work.
Start near the downspout and remove large pieces of debris from your seamless gutters initially, such as branches and leaves. Use your trowel for the packed products. Pay specific attention to any strainers there to prevent your downspout getting blocked.

When that’s done, use your garden hose to clean the dirt you can’t get rid of by hand. If the water does not drain from the downspout, then there may be a clog. To clear it, feed your hose into the bottom of the spout and turn it on at full pressure. Attempt flushing the rain gutter again to see if this has actually eliminated the blockage.

Any standing water in the gutters is an indication that it is not sloped correctly. Generally, rain gutters need to decrease a quarter inch for every single ten feet. If that isn’t the case you might need to loosen the rain gutter to straighten it correctly. Brackets ought to be fitted every two feet. Once that’s done, make certain the joints are tight and use the sealant to repair any leaks.

Post Sponsored by Chingford Roofing – Here if you have a Leaky Roof.